Handla enkelt med delbetalning,
faktura eller kortbetalning
Allt du handlar i webshoppen
eller i butiken får du bonus på.
Nordens största hobbybutik.
Över 120000 st artiklar i lager
Standard frakt 29 kr
inom Sverige med DHL.
0
0
lagerSmartSwitch set ut.board, Smart Teknik

Artikelnr S-A007

SmartSwitch set ut.board

684 kr

Frakt
Standard frakt  (29 kr inom Sverige)

Product contents:
1. (1) SmartSwitchTM control board (Without hand control board)
2. (4) SmartSwitchTM servo
3. (4) Servo bracket
4. (8) Φ3.5 x 10mm Wood Screw (For securing servo bracket)
5. (4) Φ2.6 x 15mm Wood Screw (For securing SmartSwitchTM, SmartFrogTM &stationary decoder)
6. (4) Φ3 x 20mm Pan Head Machine Screw.
7. (4) Hex nut
8. (4) Φ0.6 x 100mm(4 inch) control wire
9. (2) 500mm (19.5 inch)long extension wire
10. (2) 1000mm (39 Inch)long extension wire
11. (4) SPST 2 pin toggle switch
12. (4) 5mm plastic spacer (For securing SmartSwitchTM, SmartFrogTM &stationary decoder)

Product futures:
1. Easy to install.
2. Built-in drilling template.
3. Virtual center line for easy trouble free mounting.
4. Minimal structural interference---the servo and its mounting linkage are compact in size.
5. More mounting possibilities---traditional, off-center or horizontal rotary installation. The servo can be installed either below theroad bed or next to the turnout.
6. Adjustable servo speed and position through the programming features in the SmartSwitchTM control board to give you ultimate control for pressing the point rails against the stock rails.
7. Each control board can control up to four turnouts.
8. Can use the toggle switch and the push button to trigger servo movement.
9. Can simultaneously control one or up to four servos by using one toggle switch or push button.
10.Remember the turnout positions when power is off.
11.Provides various settings for indication and signal light.
12.Low current draw. 9V is the minimum requirement for the input power supply.
13.DCC friendly--- the SmartSwitchTM stationary decoder supports a full range of DCC accessory addresses (1-2048) and offers simple mainline address programming.
14.The decoder also supports route control features from major DCC manufacturers.
15.The SmartFrogTM has easy DCC friendly power route wiring. The precise polarity switch when both the point rails are not in contact with the stock rails allows for zero chance of short circuit.
16.The SmartSwitchTM gives you the ultimate flexibility.

Text från NMJ
Ane Model tilbyr en helt ny og gjennomarbeidet sporvekselmotorløsning som tilfredstiller alle ønsker. De er saktegående med justerbar hastighet, stille, muligheter for styring av hjertestykke, kan styres via medfølgende vippebrytere (analog) eller digital DCC med en dekoder. I tillegg trenger Peco-sporvekslene ingen modifisering eller fjerning av sporvekselfjæren. Hele systemet er gjort enkelt og tilbyr alle aspekterinnen sporvekselstyring. Det er så bra at Peco har tatt inn produktene og selger de under eget merkenavn.

NB: Denne pakken kommer uten programmeringskort. Laget for utvidelse av A001 da man kun trenger et programmeringskort.

Pakken inneholder følgende:

4 Servoer
4 Braketter for montering av servo (over og under plate)
4 Vippebrytere
4 Tilknyttningskabler 1 Meter
Hovedkort
Programeringskort for hastighet, utslag osv.
Skruer og festanordninger

Andra har köpt